Clear fault history on S300, S600, and S700 drives >

The command for clearing the fault history on the Servostar S300, S600, and S700 drives is CLREEPROM FLTHIST.  That is a space between the two words.  Type it into the terminal command line and press enter.  Sometimes it is…

How read AKD fault indication over Modbus TCP >

How to read and monitor the AKD fault/no fault condition over Modbus TCP.

Fault Messages I-O Option >

Valid for AKD Operation of the SD card device built into the I/O option board may occur in some Errors. These errors are displayed in the two digit AKD LED display. The coding is E followed by four digits. The errors are shown twice in the…

AKD Fault and Warning Messages >

Valid for AKD-B, AKD-P, AKD-T, AKD-M The two digits LED display on the front panel of the drive shows the number of the fault or warning that occurred. The left side of the LED displays "F" for a fault or "n" for warning.

AKD BASIC Fault Messages >

Valid for AKD-T (AKD BASIC) The standard AKD Fault Messages are valid for AKD BASIC as well. In case of a built-in I/O option board with SD card device, the errors described in Fault Messages I-O Option might occur as…

AKD LED Display >

Valid for AKD The AKD Drives have a 2 digit display on the front. Status, faults and warnings are shown there. Examples:

Foldback Times >

Valid for AKD Foldback time before faulting Start:  foldback is fully recovered.

AKD PDMM LED Display >

Valid for AKD-M (AKD PDMM) The AKD PDMM Drives have a two digit plus a one digit display on the front. Status, faults and warnings are shown there.

Reaction to fault situations S300-S700 >

Valid for S300, S700 Depending on the current trouble, faults are managed differently (different error levels):