CD 20 Technical Information Written by Dany van-Gelder Date 26/July/2004 CD20 is build of two electronic boards Digital board – it is the same digital board that used in all CD series 5 line or the digital board which is used in the synqnet drive, this document does not cover the digital board Power board

Mating connectors for SERVOSTAR Drives CD Series 5. Matting connector P/N C1 RS232 D9 Female EDA 8S0009SS402S25 Connector 9 pins D type for Cable solder C2 Encoder Feedback Device.

This documentation file was updated on 11/13/2012 for Servostar CD drives.

This documentation file was updated on 11/13/2012 for Servostar CD drives.

These instructions provide safety, warranty, and liability information for the Servostar CD drive. This information enables you, the customer to get this unit up and running with installation steps.

This documentation file was updated on 11/13/2012 for Servostar CD drives.

This documentation file was updated on 11/26/2012 for PC800 Series drives.

These instructions provide safety, warranty, and liability information for the PC800 series drive. This information enables you, the customer to get this unit up and running with installation steps.

This documentation file was updated on 11/26/2012 for PC800 Series drives.

The PC800 family of digital brushless servo drives are the drives you’ve been asking for — the costeffective, small servo with the best lead time in the industry. And now the family is even bigger with the addition of SERCOS connectivity. The PC840 Series of drives are the newest addition to the PC800 line.

This documentation file was updated on 11/13/2012 for Servostar CD drives.

MechaWare User Documentation

DSP User Documentation

DSP User Documentation

MPI User Documentation

MPX User Documentation

ZMP-SynqNet User Documentation

SD200_Installation_en-US_RevG