Legacy - Bronco VFD Series Manual (May 2006)

Legacy - 6SM Brushless Servo Motors Catalog - 45-100 Series

Legacy - OFDL Flyer - Open Frame Drive

Legacy - 6SM Brushless Servo Motors Catalog - 27-107 Series

Legacy - BASICMoves Development Studio is the programming environment for the Kollmorgen Servostar SC and MC controllers. This version will install on Windows 7 64bit, but has not been officially validated for Window 7.

Legacy - Speed-Thrust Curves for T and BK Motors on IDC Actuators

Legacy - Seco DC drives Catalog Aug 2004

Legacy - MotionLink for Servostar S and CD - version 4.5.2

Legacy - SEPLink Software - v.2.0.2 - for Servostar S, CD, Pico, and other Servotronix products, alternative to MotionLink - This software runs on Windows XP, and has not been officially tested on newer Windows versions.

Legacy - Servostar S and CD AKM Encoder Based System Datasheet - connection diagrams and drive settings

Legacy - Sizing IDC Actuators and Electric Cylinders - This also applies to non-IDC applications.

Legacy - Wire Pinout for AKM with Commutating Encoder to B8000

Legacy - Motor Configuration Files for BK and B8000 Series - Application Note explaining the BK motor files.

Legacy - Loading Configuration File for B8961 & B8962 - How to load a motor file into the B8961 and B8962 using Servo Tuner. This is only needed if the motor file is not contained in the drive firmware.

Legacy - B Series to BK Series IDC Motor Conversion

Legacy - BK to B8000 cable Diagram

Legacy - BK23 Lead Wire Pinout Application Note - Pinout for BK motor (AKM23D) connection to B8000 series drives. (B8000 and BK23 combination is not recommended. Motor failure is likely to occur.)

Legacy - B8000 Motor Files for BK & AKM Motors - These are the default motor configuration files for the B8001 and B8501 drives. (Do NOT use the BK23 (AKM23D) motor with the B8000 Series drives. Motor failure is likely.)

T12 (IDC) Stepper Motor Wiring Application Note

Basic Motor Theory of Permanent Magnet DC Motors