Legacy - Servostar S and CD AKM Encoder Based System Datasheet - connection diagrams and drive settings

Legacy - Wire Pinout for AKM with Commutating Encoder to B8000

Legacy - Motor Configuration Files for BK and B8000 Series - Application Note explaining the BK motor files.

Legacy - Loading Configuration File for B8961 & B8962 - How to load a motor file into the B8961 and B8962 using Servo Tuner. This is only needed if the motor file is not contained in the drive firmware.

Legacy - B Series to BK Series IDC Motor Conversion

Legacy - BK to B8000 cable Diagram

Legacy - BK23 Lead Wire Pinout Application Note - Pinout for BK motor (AKM23D) connection to B8000 series drives. (B8000 and BK23 combination is not recommended. Motor failure is likely to occur.)

T12 (IDC) Stepper Motor Wiring Application Note

Basic Motor Theory of Permanent Magnet DC Motors

DS6 Catalog Data Sheet

DS6 Deflection Spec Sheet - This shows the deflection a specific loading.

DS4 Series Positioning Tables User's Manual

DS4 Deflection Spec Sheet - This shows deflection at specific loads.

DS4 Limit Sensor with S300 Application Note - Explains how to connect the DS4 limit sensors with the S300/S600/S700 servo drives.

Legacy - The T-Series motors for IDC are a select few Pacific Scientific motors that were chosen to be standard options on IDC actuators and precision tables.

Legacy - Servostar S and CD Velocity Tuning Application Note

Legacy - Servostar S and CD Velocity Control Application Note

Legacy - Servostar S and CD Terminal Emulation Application Note

Legacy - Servostar S and CD Sine Encoder Feedback Application Note

Legacy - Servostar S and CD Serial Communication Application Note