AKD PROFINET RT Communications Manual describes the installation, setup, range of functions, and software protocol for the PROFINET AKD product series. Valid for firmware version 1.17.

EtherCAT, dual line, and local safety. Note: This firmware complies with recently revised U.S. and E.U. export regulations (E.U. Dual Use Regulation 428/2009, and U.S. Dual-use regulation EAR Category 3 under ECCN3A225)

AKD Near Servo Drive Firmware Motion Control EtherCAT and single line. Note: This firmware complies with recently revised U.S. and E.U. export regulations (E.U. Dual Use Regulation 428/2009, and U.S. Dual-use regulation EAR Category 3 under ECCN3A225).

Describes software installation, setup, and operation for the AKD PDMM drive. Includes basic topics and examples to help guide you in setting up and using the various features in the drive. Valid for KAS software version 2.12 and firmware version 1.17.

AKD EtherCAT - Beschreibt die Installation, Inbetriebnahme, den Funktionsumfang und das Softwareprotokoll für AKD mit EtherCAT. Gültig für Firmware-Version 1.17.

AKD EtherCAT Communications Manual describes the installation, setup, range of functions, and software protocol for the EtherCAT AKD product series. Valid for firmware version 1.17.

AKD CANopen - Beschreibt die Installation, Inbetriebnahme, den Funktionsumfang und das Softwareprotokoll für AKD mit CANopen. Gültig für Firmware-Version 1.17.

AKD CAN-Bus Communications Manual describes the installation, setup, range of functions, and software protocol for the CANopen AKD product series. Valid for firmware version 1.17.

AKD CAN-Bus Communications Manual describes the installation, setup, range of functions, and software protocol for the CANopen AKD product series. Valid for firmware version 1.17.

SFD3 and HDSL suport. For drives with increased Memory size only, from Hardware Revision 2.30. Do not load to former drive versions.
EN: Release of FW 6.01 for S700 (HW 2.3, 1 STO and 2 STO, all high-current). This firmware replaces the previous standard version 6.00. Elimination of problems with SFD3 communication.
DE: Freigabe der FW 6.01 für S700 (HW 2.3, 1 STO und 2 STO, alle Stromstarken). Diese Firmware ersetzt die bisherige Standard-Version 6.00. Beseitigung der Probleme mit der SFD3-Kommunikation.

Firmware for S300 drives. SFD3, HDSL support. For drives with increased Memory size only, from Hardware Revision 4.20. Do not load to former drive versions.

Provides overview, wiring diagram, electrical and mechanical specifications.

Betriebsanleitung fur Pilz S2-2 Safety Card fur Servoverstärker.

Instruction manual for Pilz S2-2 Safety Card for servo amplifiers.

Betriebsanleitung fur Pilz S1-2 Safety Card fur Servoverstärker.

Instruction manual for Pilz S1-2 Safety Card for servo amplifiers.

STEP file for 3YLN-24 motor choke. Applicable for Kollmorgen servo drives: S724, AKD-x024x.

STEP file for 3YLN-20 motor choke. Applicable for Kollmorgen servo drives: S300, S400, S601...606, S701...706, AKD-x003x...AKD-x006x.

STEP file for 3YLN-20 motor choke. Applicable for Kollmorgen servo drives: S300, S400, S601...620, S701...712.

EU-Konformitätserklärung fur AKD-N Dezentraler Servoverstärker